Akai CD3000XL Operator's Manual page 246

LOAD
If you make a mistake and accidentally tag a file you did not wish to tag, simply press
again to un-tag it, Similarly, at a later date, should you wish to remove a file from a particular tag,
move the cursor to it and press
NOTE 1: In order to tag files, if you are using an MO hard disk or removable cartridge, the write
protect tab must be off as the tagging process requires writing to disk.
NOTE 2: Because CD-ROMs are a read-only medium, you cannot tag files on a CD-ROM.
To select a tag for loading, press the
Here we can see that the first set of files tagged BASS are in volume 2 and are those shown
with the alongside them. Pressing
BASS tag sequentially. As you do so, the volumes they are in will be shown at the top right of
the screen. When you come to the end of the tagged files, successive pressing of the
key will cause the scrolling to 'wrap around' and you will be taken back to the first files tagged. If
you are happy with the selection, press
receive the usual displays for loading. If the sounds you want are not to be found in this tag,
select another tag in the
first file(s) in this tag.
You may select different types of tag loads. The default is
load any tagged programs and the samples associated with them. Selecting
samples that have been tagged.
Page 230
to un-tag it.
field. When you press
will simply load any items in the current tag. Selecting
will only load the tagged programs and
key to display this screen:
allows you to scroll through the tagged files in the
and/or to load the sounds. You will
CD3000XL OperatorÕs Manual
, you will be taken to the
and this will
will load only