Akai CD3000XL Operator's Manual page 193

FX1 MOD/ECHO
DIST/EQ
FX1 REVERB
DIST/EQ
NOTE: RV3 cannot take as its input FX2.
The same may be done with RV4 using FX2. The choices are identical to those described
above for RV3 except that RV4 takes as its input FX2. Please refer to the above description for
details.
NOTE: RV4 cannot take as its input FX1.
CD3000XL OperatorÕs Manual
The output of FX1's modulation/echo section will also be fed to the
reverb in RV3:
Again, you may have two reverbs applied to any sound routed to the
FX1 buss.
This routes the output of FX1's reverb to RV3:
This routing allows you to 'reverb reverb'! This has several uses. You
can set, for example, a gated reverb or reverse reverb effect in FX1
and add to that 'normal' acoustic reverb. You could select gated reverb
in FX1 and add to that reverse reverb in RV3. There are many
possibilities and in conjunction with the PATH CONTROL and the
various sections' level/pan controls, even more things are possible
and some very sophisticated multi-effects can be created.
RV3 REVERB
MOD/ECHO
PATH
PATH CONTROL
PATH
REVERB
MOD/ECHO
PATH
PATH CONTROL
PATH
REVERB
RV3 REVERB
E F F E C T S
L/R outs
L/R outs
L/R outs
L/R outs
L/R outs
L/R outs
Page 177