Midi Functions; Midi Filter - Akai CD3000XL Operator's Manual

GLOBAL

MIDI FUNCTIONS

When you first press the MIDI mode key, the BASIC MIDI CHANNEL CONTROL page is
entered.
The
whole and this is the MIDI channel used when in SINGLE mode and in SAMPLE mode (in
MULTI mode, the CD3000XL responds to all 16 MIDI channels and each part has its own
channel). This parameter is shown in the SINGLE mode for your information.
The
used in the PROGRAM ASSIGNABLE MODULATION system used in programs. Whatever you
select here becomes one of the choices you can make when assigning modulation sources in
a program. You may choose from any of the 128 MIDI controllers (although please note that
these are numbered 0-127 in this display). A list of these controllers is given in the appendices.
You will note that these parameters are saved to disk whenever you perform a VOLUME save.
They are not saved when performing any other type of save. Pressing F8 will reset the external
MIDI control value received by the CD3000XL to the default value.

MIDI FILTER

Pressing the
This page allows you to filter out specific MIDI information. When you enter this page, the
cursor will be at the top left of a grid of '+' signs, in a long rectangular box. You can use the
cursor keys to move to any point on the screen.
In this grid, the columns represent MIDI channels (1-16), and the rows represent MIDI
information which the CD3000XL will accept or filter. The first row, '
receive capabilities for all information on that channel, the next, '
modulation wheels, the third line, '
to an external MIDI volume control (controller 7). The last column in each row, '
the appropriate information for all MIDI channels. The '+' signs mean that the CD3000XL
accepts this information and '-' means that this information is filtered out.
If you turn the DATA control counter-clockwise, the '+' which the cursor covers will change to a
'-'. If you make this change in the
'-' and you will see a column of '-'. If you make this change in the 'all' column on the right, the
parameter for all MIDI channels will be changed and you will see a row of dashes: '-'. The top
right corner of the display (
useful for resetting the whole screen.
Page 236
parameter sets the MIDI channel for the CD3000XL as a
parameter allows you to select the external MIDI source
key (F2) will display this screen:
', refers to aftertouch, and the last line, '
row, all '+' signs in the same column below will change to a
) is a special case - all parameters will be changed which may be
', affects the CD3000XL's
', refers to the pitch and
', will affect
CD3000XL OperatorÕs Manual
', refers