Delay And Echo Effects - Akai CD3000XL Operator's Manual

DELAY AND ECHO EFFECTS

The next section in the effects allows you to set delay and echo effects. The delay line in the
multi-effects is dual channel allowing you to create ping pong and many other stereo delay
effects. It can also operate in a mono mode and this has the advantage of doubling the
available delay time. The echo/delay effects available are
MONO LEFT
MONO L+R
NOTE: Because the stereo mod section passes through the echo section, any stereo mod
effects you create (i.e. chorus, flange, phase, rotary speaker or autopan/frequency mod
effects) will be 'monofied' when MONO LEFT or MONO L+R effects are selected.
XOVER L&R
CD3000XL OperatorÕs Manual
This will create a mono echo effect and the signal is derived through the delay
line's left input.
LEFT IN
This creates mono echo and delay effects but derives its input signal from the
left and right inputs to the delay line.
RIGHT IN
LEFT IN
This is a 'pseudo-stereo' delay effect that uses the two delay lines the
feedback path of which crosses over:
LEFT IN
RIGHT IN
This gives rise to many interesting panning echo effects.
FBK
HF DAMP
DELAY R
DELAY L
FBK
HF DAMP
DELAY R
DELAY L
DELAY RIGHT
DELAY LEFT
EFFECTS EDIT
Page 191