Front Panel - Akai CD3000XL Operator's Manual

INTRODUCTION

FRONT PANEL

POWER
ON
OFF
MODE KEYS
'SOFT' KEYS
LCD
CURSOR KEYS
DATA ENCODER
-/<, +/> keys
MARK/JUMP
NAME KEY
ENT/PLAY KEY
RECORD LEVEL
MAIN VOLUME
POWER SWITCH
Page 6
F 1 F 2 F 3
SCREEN FUNCTION
F 1 F 2 F 3 F
SINGLE MULTI SAMPLE EFFECT
Selects the operating mode for the sampler.
These select functions displayed on the LCD above. They
have no fixed function but change according to the page
currently displayed on the screen.
The 40 x 8 character display shows parameters and values and
displays the 'soft' keys' function and graphic display of
waveforms for sample editing, etc..
This block of keys moves the cursor up, down and left and
right around the screen.
Allows you to enter data values and for scrolling through lists,
etc..
These keys are used to move the 'digit' cursor within long
number fields (i.e samples).
These keys allow you to mark two functions and switch
between them using the JUMP key. In this way, it is quick and
easy to enter data even across two different screens.
This takes you the 'naming mode' where you may name
samples, programs, effects, etc..
Allows you to play a sound without the need for a MIDI
controller to be connected.
Sets the record level for the analogue inputs.
The MAIN VOLUME control sets the main output level of the
L/R stereo outputs (this control does not affect the level of the
signal appearing at the individual outputs or digital output).
Applies power to the CD3000XL.
STEREO CD ROM SAMPLER -
DATA
F 4 F 5 F 6 F 7 F 8
CURSOR
4 F 5 F 6 F 7 F 8
EDIT GLOBAL SAVE LOAD
– +
/
/ /
CD3000XL OperatorÕs Manual
MAIN
REC GAIN
VOLUME
MIN MA X MIN MA X
DISPLAY
CONTRAST
MARK
JUMP
PUSH ON / OFF
PHONES
NAME
/
ENT/ PLAY