Loading From Floppy Disk - Akai CD3000XL Operator's Manual

SINGLE MODE

LOADING FROM FLOPPY DISK

The next key along, F5, gives you access to some basic disk functions for loading sounds into
the CD3000XL. Pressing
Here, you have a choice of two options: loading a particular program and its associated samples
( ) or loading the entire contents of the disk (
If you have inserted a disk, pressing
If you have inserted the wrong disk or wish to change it, insert a new disk and press the
key again. If you want to wipe out all programs and samples in memory and load the contents of
the disk, press
either do not want the programs and samples in memory, or that they are saved to disk before
you proceed. As the disk is loading, you will receive this display
indicating the loading progress.
The other option,
permitting). To do this, highlight a program using the CURSOR keys, and press
program, and its associated samples, will be loaded into memory. If the samples required by
this program already exist in memory, they will be loaded anyway, but they will overwrite the
samples currently in memory. If there is not enough memory to load a program and its samples,
the message
will be displayed. In this case, you will have to delete some existing programs and/or samples
to free up some memory space.
Page 34
in the SELECT PROG mode gives you this screen:
. You will be asked if this is what you really want to do. Make sure that you
, allows you to load a program and all associated samples (free memory
).
will bring up a list of all programs stored on that disk.
CD3000XL OperatorÕs Manual
. The