Akai CD3000XL Operator's Manual page 269

USING THE DISK RECORD FUNCTIONS
Pressing F8 -
Here you may select takes and view their record parameters as well as select new takes for
recording or deletion, etc.. To return to the main GLOBAL functions, press the GLOBAL mode
key.
The fields on the DD page are:
No other fields are accessible but merely show the takes parameters. These are:
These parameters are explained in detail later in this manual. The other fields are:
CD3000XL OperatorÕs Manual
- takes you directly to the disk record functions and will display this screen:
This shows the name of the currently selected take and you may select others
by scrolling through them with the DATA control. If this is the first time you
have used the disk record functions or you are using a freshly formatted disk,
the name field will be blank.
This shows the name of the selected take and here you may copy or rename a
take. To copy or rename a take, press the NAME key (this field will become
highlighted and
unique name is created) and type in a new name from the front panel and then
press ENT. To copy or rename the take, simply press
as appropriate. If you change your mind, press
process. You may also select takes from here by typing in their names and
pressing ENT but remember that the name you type must be the correct one
for an existing take otherwise you will be creating a new take. This will be
indicated by this field displaying
This allows you to see the free time left on disk or the amount of disk space
used expressed as mono or stereo. For example, if you have 10 minutes free
on disk when
(described below) will show 20 minutes.
This shows the length of the currently selected take.
This shows whether the take is a stereo or mono recording.
This shows the take's sampling rate.
This indicates how much disk space has been allocated for disk recording.
This shows how much space is left on the disk for recording.
This shows how many takes are on disk. When you use the disk record
functions for the first time or use a freshly formatted disk, this field will show 0.
will be displayed beneath as soon as a
is selected here, if you select
GLOBAL
(F6) or
to abort the naming
.
, the
Page 253
(F7)
field