Table of Contents
Advertisement
When data is in a FlashROM volume, a '#' is shown alongside the volume name to indicate this.
You may, of course, save other items to the FlashROM and you may choose:
MULTI+PROGS+SAMPS
ALL PROGS+SAMPLES
CURSOR PROG+SAMPS
ALL PROGRAMS ONLY
ALL SAMPLES
CURSOR ITEM ONLY
OPERATING SYSTEM
Once the data is saved, that's it. Assuming you saved some data to the AUTOLOAD volumes,
this will be loaded automatically on power up. The sampler looks for a valid operating system in
the BOOT SYSTEM volume. Once the o/s has been loaded from the BOOT SYSTEM volume,
it will then go off to see if any sound data is stored in one or more of the AUTOLOAD 1-10
volumes. Assuming it finds data there, the programs will be loaded and in a second or two,
depending on the number of programs saved, the sampler will be ready for use with your
favourite sounds available for playback.
CD3000XL OperatorÕs Manual
This will save the multi, its programs, samples and effects
to the selected FlashROM volume.
This will save all programs and samples but not the MULTI
or EFFECTS file.
You can save an individual program and its samples.
This will save all the programs in memory only.
This will save all the samples in memory only.
You may select individual items (programs, samples, multi
and effects).
You may save the current operating system (this is best
saved to the BOOT SYSTEM volume).
FLASHROM
Page 287
Advertisement
Table of Contents
