The Second Filters - Akai CD3000XL Operator's Manual

EDIT PROGRAM - SINGLE

THE SECOND FILTERS

If the IB304F filter bank is installed in your CD3000XL, the second bank of filters is accessed by
pressing
NOTE: If the IB304F is not installed, pressing
Essentially, this looks very similar to the Filter 1 page except you will notice the extra
four different types of filters: LOWPASS, BANDPASS and HIGH PASS plus a special EQ filter
selection. The lowpass filter we have already seen and offers this type of response graph:
Here, high frequency components above the cutoff frequency are removed and only lower
frequency components will pass through the filter. When the resonance control is increased,
the area around the cutoff frequency is boosted to give synthesiser effects.
The band pass selection offer this type of response slope:
Page 108
. This will display the following screen:
parameter that selects these filters' different modes. The second filter offers
ROLL-OFF SLOPE
L
E
V
E
L
FREQUENCY
ROLL-OFF SLOPE CUTOFF FREQUENCY
L
E
V
E
L
FREQUENCY
will will show this message:
CUTOFF FREQUENCY
HARMONICS
HARMONICS
CD3000XL OperatorÕs Manual