SAM PLE
If you press GO or when the threshold is exceeded or the MIDI note is received, the CD3000XL
will start recording and you will get a display something like the following:
This indicates that the CD3000XL is recording digitally. As with analogue recording, the display
fills with the incoming sound's waveform.
NOTE: The CD3000XL has difficulty recording at 48kHz (i.e. from a DAT machine). You will
receive the following warning if you try to record at 48kHz:
It is advisable not to record at 48kHz.
Having successfully made your recording(s), analogue or digital, we can now move on to
sample editing.
But first...
**
SAVE YOUR SAMPLES TO DISK NOW **
It is good practice to repeatedly save your work as you go - all good programmers do this and it
is a good habit to get into. You may make a mistake and accidentally record over a precious new
sample, you may trip over the power cord and disconnect the mains, you may have a power cut
- these things do happen!!
CD3000XL OperatorÕs Manual
Page 131