Setting The Tuning Step - Alinco DJ-V17TFH Instruction Manual

Tuning step
5.0kHz 1kHz
10.0kHz 10kHz
12.5kHz 10kHz
15.0kHz 10kHz
20kHz 10kHz
25kHz 10kHz
30kHz 10kHz

4.4.2 Setting the Tuning Step

1. Press the FUNC key in the VFO mode, and while
key to display the current tuning step.
2. Rotate the dial to select the desired tuning step.
STP-5 STP-10
3. Press any key except for the MONI key to complete setting.
NOTE:
• Tuning step can't be changed in the Memory mode.
• When the tuning step is changed from 5kHz,10kHz,15kHz,20kHz or 30kHz to
12.5kHz and 25kHz or vice versa, the operating frequency and the shift width
automatically suite to the new setting.
Entry completion digit
Accept 0 or 5 as valid number.
Accept any of 0 to 9 keys.
When you input the 10kHz digit, the 1kHz digit is
set automatically as follows.
0---00.0, 1---12.5, 2---25.0, 3---37.5, 4---invalid,
5---50.0, 6---62.5, 7---75.0, 8---87.5, 9---invalid
Auto-complete after the 10kHz digit entry.
Auto-complete after the 10kHz digit entry.
When you input the 10kHz digit, the 1kHz digit is
set automatically as follows.
0---00.0, 2---25.0, 5---50.0, 7---75.0
Other entries are invalid.
Auto-complete after the 10kHz digit entry.
DOWN
STP-12.5 STP-15
4.Basic Operation
Final digit selection
is displayed, press the
UP
STP-20 STP-25
4
(unit: kHz)
STP-30
25