Cloning And Packet Operation; Cloning; Cable Connection; Master/Slave Units - Alinco DJ-V17TFH Instruction Manual

9.Cloning and Packet Operation

9. Cloning and Packet Operation
9.1

Cloning

The memory data and customized operational parameters can be transferred from a
Master unit to other DJ-V17 (Slave units).

9.1.1 Cable Connection

• Make sure that both units are turned off before connecting the cable.
• Connect the Microphone/Speaker jack on the Master unit with the Slave unit using
an optional clone cable (EDS-11) as shown below, then turn on both units.
o the MIC/SP jack on the Master unit

9.1.2 Master/Slave Units

Press the PTT key three times while holding down
the MONI key.
"CLONE" is displayed on the LCD, and both units
enter the Clone mode.
9
50
* Be sure to securely screw the plug all the way down to the jack
o the MIC/SP jack on the Slave unit