Auto Dialer; Setting The Auto Dialer; Generating The Auto Dialer Codes - Alinco DJ-V17TFH Instruction Manual

6.Selective Calling
6.4

Auto Dialer

The DTMF tones can be stored in the memory to automatically transmit.

6.4.1 Setting the Auto Dialer

• All 16 DTMF tones up to 16 characters are available for each of 9 memories called
an Auto Dialer memory.
Programming the Auto Dialer Memories
1. Press the FUNC key, and while
enter the Dialer Setting mode. The "M1" appears.
There are six space available for characters on the display, and nothing is displayed initially.
2. Select a desired Auto Dialer memory channel from M1 to M9 by rotating the dial.
3. Use the DTMF key to input the DTMF tones.
For example: when programming 123456789, the display changes as follows:
[
[345678] –> [456789]
• To set a pause instead of a tone, press the FUNC key, and while
6
press the
The pausing time is approx. 1 second.
• Press the FUNC key, and while
to see the hidden characters.
• To clear the programming, press the FUNC key, and while
key.
4. Press the PTT key to complete the programming.

6.4.2 Generating the Auto Dialer Codes

Please program the Auto Dialer memory channel(s) in advance.
1. Press the
2. Press one of the
automatically generate the DTMF tones.
Auto Dialer Operation While Transmitting
1. While pressing the PTT key, press the FUNC key. "DIAL" is displayed on the
LCD. Don't release the PTT to proceed.
2. Press one of the
40
1] –> [ 12] –> [
key. "-" is displayed for a pause.
key. "DIAL" is displayed on the LCD.
to
to
is displayed on the LCD, press the
123] –> [ 1234] –> [ 12345] –> [123456] –> [234567] –>
is displayed, rotate the dial to scroll the display
key (corresponding to memory #1~#9) to
key to automatically transmit the DTMF tones.
key to
is displayed ,
is displayed, press the