Setting Channel Step Intervals; Increasing Or Decreasing The Frequency In 1Mhz Steps; Directly Inputting Frequencies - Alinco DJ-G7 Instruction Manual

6.0peration Mode
.Switching Bands
~
6
A band can be chosen by pressing the L~:' key or the
[ij.'
key.
[ 6-2 Setting Channel Step Intervals
Channel steps can be defined as intervals or steps between amateur radio
frequencies and/or radio and TV stations assigned by respective countries.
Although this product is programmed with standard steps, it allows changing the
steps if necessary. Please refer to "Changing the Channel Steps (P.60)" for
adjusting channel steps.
( 6-3 Increasing or Decreasing the Frequency in 1MHz Steps
J
.Changing Frequencies on the Main Band
In the VFO mode, to change frequencies on the main band in steps of 1 MHz,
rotate the upper main dial while pressing the .~\ key. The displayed frequency
will increase or decrease in 1MHz steps.
• Changing Frequencies on the Sub Band
In the VFO mode, when
chan~g
frequencies on the sub band, rotate the upper
sub dial while pressing the
\.~\
key. The displayed frequency will increase or
decrease in 1MHz steps.
MEMO
·When increasing or decreasing sub band frequencies in 1MHz
steps, the frequency will change without regard to the range of
specific bands.
·If the dial isn't rotated when the
\~,
key is pressed, the Key lock
activates.
( 6-4 Directly Inputting Frequencies
Frequencies can be directly entered using the numerical keypad.
Example 1: To enter 145.000MHz,
!IID~
T ""'"
press the
\:D ,
'.e~
and
\J
keys and press the
@,
key.
Example 2: To enter O.7,,20MHz (sub
~and),
""'"
Press the
C\'! ,
~
and
\~
keys and press the
@)
ke~
Press the Ql
r
I
~
and
'i'€
keys and then press the
@)
key.
Example 3: To enter 1270.680MHz,
Pres~eG. ~
,
~
,
Cl J .
~
and
~
keys and then press
the
(@,
key.
If there is an error in selecting a frequency, press the [PTT] key or the
~.\
key and
the process can be redone from the start.
35