Battery Pack - Alinco DJ-V17TFH Instruction Manual

2.1.4 Battery Pack

For the specifications and the charging procedures, please refer to "Battery
Packs"(page 56) and "Using the Chargers"(page 57).
Attaching the Battery Pack
Align the catches on the battery pack with the
grooves on the unit, and close the latch until it clicks.
Removing the Battery Pack
Push the latch in the direction of the arrow, and pull
out the battery pack.
Caution
• The battery pack isn't fully charged when shipped. It must be charged
before use.
• Charging should be conducted in a temperature range of 0ºC to +40ºC
(+32ºF to +104ºF).
• Don't modify, dismantle, incinerate or immerse the battery pack in the water
as this can be dangerous.
• Never short-circuit the battery pack terminals, as this can cause damage to
the equipment or lead to heating of the battery which may cause burns.
• Unnecessary prolonged charging (overcharging) can deteriorate battery
performance.
• The battery pack should be stored in a dry place where temperature is in
-10ºC to +45ºC (-14ºF to +113ºF) range. Temperatures outside this range
can cause the battery liquid to leak. Exposure to prolonged high humidity
can cause corrosion of metal components.
• Battery-packs are a consuming part. When its operating time becomes
considerably short after a normal charge, please consider that the pack is
exhausted and replace it with a new one.
• The battery pack is recyclable. Check with your local waste officials for
details on recycling options or proper disposal in your area.
2.Accessories
Catch
Latch
Groove
2
15