Setting The Channel Step - Alinco DR-620T/E Instruction Manual

Vhf/uhf fm transceiver

Hide thumbs Also See for DR-620T/E:

Table of Contents

Setting the channel step

When the unit is in VFO mode, enter into the

SET mode and select the channel step setting

display. (Refer to page 32 and 33 for SET

mode).

The current channel step will be displayed.

You can change the channel step as below by

rotating the dial.

Pressing any key other than FUNC key or SQL

key on the unit will complete the setting and

the display will return to the original status.

IMPORTANT: By changing the channel step frequency, settings below 10kHz may be auto-

STEP 5

STEP 8.33

(5 kHz)

(8.33 kHz)

STEP 100

STEP 50

(100 kHz)

(50 kHz)

matically corrected.

Channel step setting display (default)

STEP 10

STEP 12.5

(10 kHz)

(12.5 kHz)

STEP 30

STEP 25

(30 kHz)

(25 kHz)

Basic Operations

STEP 15

(15 kHz)

STEP 20

(20 kHz)

Table of Contents