Table of Contents
Advertisement
4.3
Adjusting the Squelch
Squelch is a function that eliminates the noise when no signals are being received.
• There are 11 squelch levels (00~10).
• The default setting is Level 00.
1. Press the
on the LCD.
2. Rotate the dial to increase or decrease the squelch
level. Set to the lowest level that the noise is cut.
3. Press any key except for the MONI key or just leave it for 5 seconds to
automatically complete the setting.
4.4
Setting the Frequency in the VFO Mode
The factory default of this unit is the VFO mode. The VFO mode allows you to
change the frequency and operating parameters by using the dial and key operations.
4.4.1 Setting the Frequency
To Select the VFO Mode
The
key switches between the VFO, Memory and Call channel mode each time
the key is pressed.
"
" is displayed in the Memory mode and " " in the Call channel mode.
Selecting the Operating Frequency
Rotate the dial clockwise to increase the frequency by one tuning step.
Rotate the dial counter-clockwise to decrease it by one tuning step.
A beep sounds after every 0.5MHz increases/decreases in the frequency.
To Quickly Change the Frequency
Press the FUNC key, and while
or decrease (depending on the direction of rotation) the frequency by 1MHz order.
4.4.2 Setting the Tuning Step
1. Select the menu 09 in the Set mode to display the current tuning step.
2. Rotate the dial to select the desired tuning step.
key. The squelch level is displayed
is displayed on the screen, rotate the dial to increase
4.Basic Operation
4
25
Advertisement
Table of Contents
