Receiving; Monitor Function - Alinco DJ-V17TFH Instruction Manual

IMPORTANT NOTE:
• The dial and direct key-entry of frequency/memory channel are blocked in the
Call mode.
• It is possible to temporary change the offset and CTCSS/DCS related
parameters in the Call mode.
• The Scan function is deactivated in the Call mode.
• The CALL channel reprogramming is possible but it can't be deleted from the
memory channel mode.
4.7

Receiving

1. Turn on the unit.
2. Press the
3. Press the
4. Select the frequency that you wish to operate by using the dial or the keypad.
When a signal is received on the frequency that you selected,
are displayed on the LCD, then the received signal can be heard. The green RX
indicator also lights at this time.

4.7.1 Monitor Function

In case the receiving signal is weak and the audio is intermittently cut off by the
squelch, press the MONI key. As long as this key is pressed, the squelch including
TSQ/DCS unmutes making the audio easier to hear.
• The squelch is unmuted while the MONI key is pressed, regardless of the squelch
level setting.
• This function unmutes the squelch even if the DCS and Tone Squelch functions are
set.
key and rotate the dial to adjust the audio level as necessary.
key and rotate the dial to adjust the squelch level.
4.Basic Operation
4
and S-meter
29