Set Mode; Set Mode Operation; Entering The Set Mode - Alinco DJ-V17TFH Instruction Manual

8.Set Mode

8. Set Mode
The Set mode is used to customize the various operational parameters of your DJ-V17.
8.1

Set Mode Operation

This chart shows the available parameters in the Set mode.
enu Default setting Function
01
02
03
04
05
06
07
08
09
10
11
12
8.2

Entering the Set Mode

8
1. Press the FUNC key for at least 2 seconds.
The unit enters the Set mode.
"BS-ON" is displayed as a factory-default.
2. Press the MONI key or FUNC key to select a menu.
The Monitor function can't be used in this status.
3. Rotate the dial to change the parameter.
4. Press any key other than the MONI key and FUNC key to complete the settings.
The last operated menu will be selected the next time you enter the Set mode.
44
BS-ON Battery Save ON/OFF
TIMER Timer/Busy scan setting
BEP-ON Beep sound ON/OFF
1750 Tone-Burst Frequency setting
SFT-OF CPU Clock Frequency shift ON/OFF
BCL-OF Busy Channel Lock Out ON/OFF
TP-OFF TOT Penalty setting
DWT-01 DTMF Wait time setting
DP-60 DTMF Pause/Burst time setting
DB-60 DTMF First Digit Burst time setting
CHG-OF Battery Charge ON/OFF
BATT-NI Battery type setting
MONI key
FUNC key