Table of Contents
Advertisement
5. Stand near the
console
and
press
. The
TEST
wireless
sensor
transmitter's indi-
cator blinks.
6. Release
TEST
The
console
chimes and logs
in the newly gen-
erated code for
the wireless sen-
sor
transmitter.
The
first
avail-
able zone indica-
tor on the console
lights.
7. Set
inside
DELAY
the wireless sen-
sor
transmitter's
battery compart-
ment to
to
MIN
protect a window
or to
to pro-
MAX
tect a door. Then
close the battery
compartment's
cover.
8. Place one of the supplied num-
bered stickers on the sensor to
show its zone number.
9. Leave the console's switch set to
to install other accesso-
INSTALL
ries.
Repeat Steps 1–8 for additional
wireless sensor transmitters.
14
.
INITIALIZING THE
MOTION SENSOR
1. Press the four dots on the battery
compartment cover and slide the
cover down to remove it.
2. Install four 1.5V AA alkaline bat-
teries inside the motion detector's
battery compartment according to
the polarity symbols (+ and –) and
replace the cover.
3. Be sure the console's
switch is set to
RUN 1/RUN 2
.
INSTALL
INSTALL/
Hide quick links:
Advertisement
Table of Contents
