Temporarily Placing The Sensor Alarm - Radio Shack 65562 Owner's Manual

49-329.fm Page 15 Thursday, June 1, 2000 7:46 AM
TEMPORARILY PLACING THE
SENSOR ALARM
Before you permanently mount the sensor alarm,
temporarily place it at the selected location so you
can check the coverage area. You might need to
check several different locations to find the best one.
Place the main unit on a stepladder (for example) at
the recommended height, then move the stepladder
to various locations in the room(s) you want to pro-
tect.
Checking the Coverage Area
To be sure the sensor detects motion in the areas you
want to protect, follow these steps.
1. If necessary, disarm the sensor alarm (the red
indicator should not be flashing) by entering the
current security code.
2. Confirm that the area is clear of anything that
might trigger the alarm (such as people and
pets).
Installation
15