Operation; Arming/Disarming The System; Arm Away/Arm Home; Instant/Delay Mode - Radio Shack 49-2551A Owner's Manual

OPERATION

ARMING/DISARMING
THE SYSTEM
You can arm the system three ways:
• Set
INSTALL/RUN 1/RUN 2
console to
RUN 1
press on the console.
ARM
• Set I
NSTALL/RUN 1/RUN 2
console to
RUN 1
press
ARM AWAY
on the handheld remote control.
See "Arm Away/Arm Home" and

"Instant/Delay Mode."

• Set
INSTALL/RUN 1/RUN 2
console to
RUN 1
press on
ARM
remote control.
The only difference between
and is that when the system is
RUN 2
set to and not armed, the con-
RUN 2
sole sounds a pleasant chime when
you open a door or window. When it is
set to , there are no chimes.
RUN 1
The console beeps once when you
arm it. When the system is armed, the
and setting have the
RUN 1 RUN 2
same effect: opening a door or window
with a sensor attached or tripping a
motion detector sets off the alarm.
To disarm the system, press
on any remote control. The console
beeps twice.
26

Arm Away/Arm Home

All wireless sensor transmitters and
motion detectors arm when you press
ARM AWAY
on the control. If you press
or and doors and windows arm. This lets you
RUN 2
arm the system at night without acci-
dentally tripping the motion detector(s)
on the
yourself when you move around the
or and
RUN 2
house.
or
ARM HOME
on the
or and
RUN 2
the keychain
RUN 1
Instant/Delay Mode
The
mote control lets you arm the system
with or without an exit/entry delay.
With
set to
sor(s) set to
arms and the alarm immediately trips if
a wireless sensor transmitter or motion
DISARM
detector reports an intrusion.
With
set to
exit delay and a 30-second entry delay
before the system arms or trips. A
warning chime sounds during the de-
lay period.
on the handheld remote
ARM HOME
switch on the handheld re-
ENTRY
on the handheld remote
ENTRY
(and
INSTANT DELAY
), the system instantly
MIN
on the handheld remote
ENTRY
, you have a 60-second
DELAY
, only
on the sen-