Installing The Handheld Remote Control - Radio Shack 49-2551A Owner's Manual

2. Press on the remote control.
ARM
The indicator on the remote con-
trol blinks.
3. Set the console's
switch to
RUN 2 INSTALL
4. Stand near the console and press
again. The indicator blinks
ARM
again, and the console chimes
and logs in the remote control.
5. Leave the console's switch set to
to install other accesso-
INSTALL
ries.
Notes:
• You can add any combination of
up to eight Plug 'n Power
remote controls.
• When you press a button, BAT-
TERY lights on the remote con-
trol to show the battery is good.
12
INSTALL/RUN 1/
.
INSTALLING THE
HANDHELD REMOTE
CONTROL
1. Press the tab on the battery com-
partment cover and lift off the
cover.
2. Install four AAA alkaline batteries
in the handheld remote control's
battery compartment, according
to the polarity symbols (+ and –)
marked inside the compartment.
Still Missing-Paste in
this illustration
Proof to Mass Print
stage.
3. Be sure the console's
switch is set to
RUN 1/RUN 2
.
INSTALL
4. Set the house code on the remote
control to the same letter as the
console.
5. Press
ARM HOME
on the handheld remote control.
The console chimes.
at
INSTALL/
or
ARM AWAY