Installing The Keychain Remote Control - Radio Shack 49-2551A Owner's Manual

Note: Be sure to install the
backup battery. If there is no bat-
tery and the console loses AC
power, you must re-initialize all of
the system's accessories.
5. Plug the console into any stan-
dard AC outlet that is not con-
trolled by an on/off switch.
6. Plug the telephone cord into the
console and plug the other end
into a modular phone jack.
Notes:
• If you do not have an unused jack,
use the supplied duplex adapter.
For a baseboard jack, plug the
adapter into the jack; for a wall
jack, plug the adapter into the
console.
• If you do not have a modular
phone jack, you can either update
the wiring yourself or have the
phone company do it for you.
RadioShack stores sell the jacks
and adapters you need. The
USOC number of the jack to be
installed is RJ11C for a baseboard
jack or RJ11W for a wall jack.
INSTALLING THE
KEYCHAIN REMOTE
CONTROL
1. Slide off the keychain remote con-
trol's battery compartment cover.
Install two AAA alkaline batteries
in the compartment, according to
the polarity symbols (+ and –)
marked inside. Then replace the
compartment's cover.
11