Multi-function board
Description
Function board
Before removing the function board, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the bottom cover (see
5.
Remove the battery (see
6.
Remove the keyboard (see
7.
Remove the heat sink/fan assembly (see
8.
Remove the system board (see
Remove the function board:
1.
Remove the Phillips PM2.0×3.0 screw (1) that secures the board to the computer.
2.
Lift the board up and off the computer (2).
NOTE:
Reverse the removal procedures to install the function board.
64
Chapter 5 Removal and replacement procedures for Authorized Service Provider parts
Bottom cover on page
Battery on page
Keyboard on page
System board on page
The function board cable is available in the Cable Kit, spare part number 739564-001.
35)
41).
50)
Heat sink/fan assembly on page
61)
Spare part number
739574-001
59)