Speaker Assembly - HP EliteBook 1040 G1 Maintenance And Service Manual

Speaker assembly

Description
Speaker assembly (includes cable)
Before removing the speaker assembly, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the bottom cover (see
5. Remove the battery (see
6. Remove the keyboard (see
7. Remove the heat sink/fan assembly (see
8. Remove the system board (see
Remove the speaker assembly:
1. Use a tool to pry the speaker and disengage the adhesive that secures it to the computer (1).
2. Remove the speaker (2) from the computer.
Reverse this procedure to install the speakers.
66 Chapter 5 Removal and replacement procedures for Authorized Service Provider parts
Bottom cover on page
Battery on page 41).
Keyboard on page 50)
Heat sink/fan assembly on page
System board on page
35)
59)
61)
Spare part number
739577-001