Performing A System Recovery; Usb Recovery Option (Select Models Only) - HP EliteBook 1040 G1 Maintenance And Service Manual

5. Under Restore Point, click the time and date of the backup.
NOTE:
version.
6. Click Restore to start restoring the files, or click Cancel to cancel the operation.

Performing a system recovery

Recovery allows you to repair or restore the computer to its original factory state. You can create an HP
Factory Image Restore DVD, using an installed or an external DVD±RW optical drive.
CAUTION:
have created and any software installed on the computer are permanently removed. The recovery tool
reinstalls the original operating system and HP programs and drivers that were installed at the factory.
Software, drivers, and updates not installed by HP must be manually reinstalled. Personal files must be
restored from a backup.
To restore the computer using the HP Factory Image Restore DVD, you must first create the recovery disc. To
create the recovery disc:
NOTE: HP recommends that you create the HP Factory Image Restore DVD in the event of a system failure.
1. Select Computer > More Applications.
2. In the left pane, click Tools, and then click Create HP Factory Image Restore DVD in the right pane.
3. Follow the on-screen instructions to create an image file to burn a recovery disc.
To restore the computer from the recovery disc, follow these steps:
1. If possible, back up all personal files.
2. Insert the HP Factory Image Restore DVD into the optical drive and restart the computer.
3. As the computer is restarting, press
4. Press the down arrow to select Restore SLED HP-BNB preload image from the Linux boot menu, and
then press enter.
5. Using the arrow keys, select Yes when prompted: Do you want to start the System-Restore?
6. Follow the on-screen instructions.

USB Recovery option (select models only)

The USB Recovery Disk On Key (flash drive) option allows you to create a backup image of the SLED operating
system installed on select HP Business Notebooks. This Disk On Key may be used to restore the system to the
original factory state when the F11 recovery option is not available. This process should be done on first
obtaining the computer.
CAUTION:
Disk On Key used for the recovery process. Back up any data on the Disk on Key or the notebook that will be
recovered before starting.
NOTE: HP recommends that you create the USB Recovery Disk in the event of a system failure. The Disk On
Key used for this process should be 4 GB or larger.
Creating a USB Recovery Disk On Key
98 Chapter 12 Backup and Recovery in Linux
If multiple backups have been performed, click Use the latest version to restore the latest
Using Recovery completely erases hard drive contents and reformats the hard drive. All files you
The USB recovery option does not preserve data present on the computer's hard drive or on the
f9 to open the Computer Setup boot option menu.