Rtc Battery - HP EliteBook 1040 G1 Maintenance And Service Manual

RTC battery

Description
RTC battery (includes double-sided tape)
Before removing the RTC battery, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the bottom cover (see
Remove the RTC battery:
1. Disconnect the RTC battery cable (1) from the system board.
2. Detach the RTC battery (2) from the computer.
3. Remove the RTC battery.
Reverse this procedure to install the RTC battery.
40 Chapter 5 Removal and replacement procedures for Authorized Service Provider parts
Bottom cover on page 35).
Spare part number
739562-001