Keyboard - HP EliteBook 1040 G1 Maintenance And Service Manual

Keyboard

Description
Keyboard
NOTE: For a detailed list of available keyboards, see
Before removing the keyboard, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the bottom cover (see
5. Remove the battery (see
6. Remove the memory module (see
Remove the keyboard:
1. Loosen the 2 captive Phillips screws that secure the keyboard to the computer.
2. Release and disconnect the following connectors and cables:
●
Release the keyboard connector (1) and remove the cable (2).
●
Release the backlight connector (3) and remove the cable (4).
50 Chapter 5 Removal and replacement procedures for Authorized Service Provider parts
Sequential part number listing on page
Bottom cover on page
Battery on page 41).
Memory module on page
22.
35).
44).
Spare part number
739563-xx1