ForcePad (Touchpad)
Description
ForcePad (Touchpad) (includes cable)
Before removing the ForcePad, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the bottom cover (see
5.
Remove the battery (see
Remove the ForcePad:
1.
Disconnect the ForcePad cable (1) and the NFC module cable (2) from the connectors on the ForcePad.
2.
Remove the cables from under the Mylar that secures them (3).
Bottom cover on page
Battery on page
41).
35).
Component replacement procedures
Spare part number
739565-001
53