Bottom Cover - HP EliteBook 1040 G1 Maintenance And Service Manual

Bottom cover

NOTE: The bottom cover is available in the Plastics kit, spare part number 739575-001.
Description
Plastics kit
Before removing the bottom cover, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the battery (see
Remove the bottom cover:
1. Remove the five inner Torx T8M2.0×5.0 screws (1) and the six outer Torx T8M2.0×5.0 screws (2) that
secure the bottom cover to the computer.
Battery on page 41).
Spare part number
739575-001
Component replacement procedures 35