System Settings - Restrict User Access; Restrict Access To Job Settings - Changing Job Priority; Restrict Operation - Restrict Broadcasting; System Settings - Stamp Settings - Fax Tx Settings - Oce VarioLink 5022 User Manual

Administrator mode settings

Shift Output Each Job

Set up the Output Tray Setting according to various printing functions.
9.4.3

System Settings - Restrict User Access

Restrict Access to Job Settings - Changing Job Priority

For the setting procedure, refer to
Addresses" on page

Restrict Operation - Restrict Broadcasting

For the setting procedure, refer to
9.4.4

System Settings - Stamp Settings - Fax TX Settings

Specify whether or not the stamp setting is canceled when a fax is sent.
!
Detail
When "Cancel" is selected, the fax transmission original page is transmitted without applying the stamp
setting.
When "Do Not Cancel" is selected, the stamp setting is applied also to the fax transmission original
page.
9.4.5

System Settings - Reset Settings - Job Reset - Next Job - Reset Data After Job

For the setting procedure, refer to
After Job" on page
VarioLink 5022/VarioLink 4222/VarioLink 3622
"Restrict Access to Job Settings - Registering and Changing
9-9.
"Restrict Operation - Restrict Broadcasting" on page
"System Settings - Reset Settings - Job Reset - Next Job - Reset Data
9-13.
9
9-10.
9-15