Fax Settings - Tx/Rx Settings; Fax Settings - Function Settings; Function On/Off Setting - Destination Check Display Function; Activity Report - Oce VarioLink 5022 User Manual

Administrator mode settings
9.5.8

Fax Settings - TX/RX Settings

For the setting procedure, refer to
!
Detail
To enable the setting for [Print Paper Size], set [Tray Selection for RX Print] to "Auto".
The available tray types vary depending on the options that are installed.
9.5.9

Fax Settings - Function Settings

Function ON/OFF Setting - Destination Check Display Function

For the setting procedure, refer to
page 9-30.

Memory RX Setting

For the setting procedure, refer to
9.5.10

Fax Settings - Report Settings - Output Settings

Activity Report

For the setting procedure, refer to

TX Result Report

For the setting procedure, refer to

Sequential TX Report

For the setting procedure, refer to

Broadcast Result Report

For the setting procedure, refer to

TX Result Report Check

For the setting procedure, refer to

Network Fax RX Error Report

Specify the output setting for the network fax RX error report. Select the option to output or not to output.
VarioLink 5022/VarioLink 4222/VarioLink 3622
"Fax Settings - TX/RX Settings" on page
"Function ON/OFF Setting - Destination Check Display Function" on
"Memory RX Setting" on page
"Activity Report" on page
"TX Result Report" on page
"Sequential TX Report" on page
"Broadcast Result Report" on page
"TX Result Report Check" on page
9-24.
9-31.
9-36.
9-36.
9-37.
9-39.
9-39.
9
9-46