Administrator mode settings
9.5
Administrator Settings (IP/I-FAX)
This section explains Administrator settings specified for Internet fax and IP address fax operations.
9.5.1
System Settings - Power Save Settings - Enter Power Save Mode
For the setting procedure, refer to
on page
9-14.
9.5.2
System Settings - Restrict User Access
Restrict Access to Job Settings - Changing Job Priority
For the setting procedure, refer to
Addresses" on page
Restrict Access to Job Settings - Change the "From" Address
For the setting procedure, refer to
Mail)" on page
!
Detail
The From address is the address specified for the device.
Restrict Operation - Restrict Broadcasting
For the setting procedure, refer to
9.5.3
System Settings - Stamp Settings - Fax TX Settings
For the setting procedure, refer to
9.5.4
Network Settings - Network Fax Settings
Network Fax Function Settings
For the Network Fax Function Setting procedure, refer to User's Guide [Network Administrator].
SMTP TX Settings
For the SMTP TX setting procedure, refer to User's Guide [Network Administrator].
SMTP RX Settings
For the SMTP RX setting procedure, refer to User's Guide [Network Administrator].
9.5.5
Fax Settings - Header Information
For the setting procedure, refer to
!
Detail
For RTI, [Outside Body Text] cannot be used for Internet fax/IP address fax. Even when [Outside Body
Text] is selected, the information is attached inside the body text.
9.5.6
Fax Settings - Header/Footer Position
For the setting procedure, refer to
9.5.7
Fax Settings - Line Parameter Setting (IP)
Number of Redials
For the setting procedure, refer to
Redial Interval
For the setting procedure, refer to
VarioLink 5022/VarioLink 4222/VarioLink 3622
"System Settings - Power Save Settings - Enter Power Save Mode"
"Restrict Access to Job Settings - Registering and Changing
9-9.
"Restrict Access to Job Settings - Change the "From" Address (E-
9-10.
"Restrict Operation - Restrict Broadcasting" on page
"System Settings - Stamp Settings - Fax TX Settings" on page
"Fax Settings - Header Information" on page
"Fax Settings - Header/Footer Position" on page
"Number of Redials" on page
"Redial Interval" on page
9-16.
9-18.
9-22.
9-22.
9
9-10.
9-15.
9-45