Relay Distribution (G3); Relay Distribution; To Enable Relay Distribution - Oce VarioLink 5022 User Manual

Useful functions (G3/IP/I-FAX)
6.5

Relay distribution (G3)

6.5.1

Relay distribution

This function saves a fax document to be transmitted in a relay station, and then transmit it to destinations
from the relay station. If broadcasting to remote recipients frequently occurs, the overall communications
cost can be reduced by grouping a relay station and destinations by area, compared to individual
transmissions.
A fax machine that functions as a relay station to which relay request is issued is referred to as a relay
instruction station.
A fax machine that receives faxes from a relay instruction station and relays it on is referred to as a relay
distribution station.
This relay distribution function is available only when the relay distribution machine is a model having the F-
code functions.
!
Detail
This cannot be used with the following functions:
Polling TX
Polling RX
Bulletin Registration
Bulletin Polling RX
Password TX
6.5.2

To enable relay distribution

This machine can function as a relay distribution station as well as a relay instruction station.
For the procedure for sending a fax from this machine as a relay instruction station, refer to
faxes to a relay distribution station" on page
In order to use this machine as a relay distribution station, it is necessary to specify a relay user box for saving
documents to be distributed via a relay station and destinations.
To specify destinations, specify a group destination beforehand.
Note
For details on the procedure for creating relay user boxes, refer to the User's Guide [Box Operations].
VarioLink 5022/VarioLink 4222/VarioLink 3622
Originating
Intermediate relay
station
station
Toll Call
6-7.
Terminating station
Local Call
Terminating station
6
"Transmitting
6-6