Administrator mode settings
9.4
Administrator Settings (G3)
This section explains Administrator settings specified for G3 fax transmission. The explanation here is
commonly applicable to the network fax function.
9.4.1
System Settings - Power Save Settings - Enter Power Save Mode
Specify conditions for entering power save mode.
-
Normal: If data is received in power save mode, the machine completes printing and then enters power
save mode again after a certain length of time.
-
Immediately (Default): If data is received in power save mode, the machine completes printing and then
immediately enters power save mode again.
9.4.2
System Settings - Output Settings
Set up the printing items by Output Setting.
Output Tray Settings
Set up whether the output is shifted each job or it does not carry out.
VarioLink 5022/VarioLink 4222/VarioLink 3622
9
9-14