To Output In Full Size - Oce VarioLink 5022 User Manual

Receiving data (G3/IP/I-FAX)
Note
For information on [Auto Tray Selection Setting], refer to the User's Guide [Copy Operations].
When [Print Separate Fax Pages] is set to [ON], printing is not output on separate pages if [TX/RX Settings]
in the Utility mode screen is set as follows:
- A fixed tray is specified using [Tray Selection for RX Print].
- [Min. Reduction for RX Print] is set to "×1.0".
- [Print Paper Selection] is set to [Fixed Size] or [Priority Size].
- [Duplex Print (RX)] is set to [ON].
Note
For details on [Tray Selection for RX Print], [Min. Reduction for RX Print], [Print Paper Selection], and
[Duplex Print (RX)], refer to
If no paper applicable for printing is prepared, a message appears, prompting to set paper.
- When [Print Paper Selection] is set to [Priority Size], either 8-1/2 × 11, 8-1/2 × 14, or 11 × 17 (A4, B4,
or A3) is selected as the optimal paper size. If paper of that size is not in the tray, the standard paper
selection is performed for printing.
- When [Print Paper Selection] is set to [Fixed Size], either 8-1/2 × 11, 8-1/2 × 14, or 11 × 17 (A4, B4, or
A3) is selected as the optimal paper size. If paper of that size is not in the tray, a message is displayed
until paper of the relevant size is supplied.
- When [Tray Selection for RX Print] is set to an option other than [Auto Paper Select], paper in the paper
tray specified for [Tray Selection for RX Print] (except for the bypass tray) is used for printing. If the width
of the paper is smaller than that of the received document, printing is performed in a reduced mode. If
the specified paper tray is empty, a message is displayed until paper of the relevant size is supplied.
- When [Print Paper Selection] is set to an option other than [Auto Select], and [Tray Selection for RX
Print] to an option other than [Auto Paper Select], the setting for [Tray Selection for RX Print] is given
priority.
5.6.3

To output in full size

If [Min. Reduction for RX Print] is set to "×1.0", paper of the same size is used for printing in full size. If paper
of the same size is not prepared, paper of a larger size is used for printing.
!
Detail
Separate-page printing is not available.
An image larger than the 11 × 17 (A3) size cannot be printed out.
If paper of the optimal size is not in the tray, a message is displayed until paper of the relevant size is
supplied.
VarioLink 5022/VarioLink 4222/VarioLink 3622
"Fax Settings - TX/RX Settings" on page
Original Received original
Printing to
equal size
9-24.
5
5-11