Application - Tx Stamp (G3/Ip/I-Fax); Tx Stamp; Printing A Tx Stamp - Oce VarioLink 5022 User Manual

Transmitting data
4.4.17

Application - TX Stamp (G3/IP/I-FAX)

TX Stamp

When sending a document using the ADF, a TX Stamp can be printed on the original after it is scanned to
enable page-by-page checking that scanning has succeeded. When sending a double-sided original, a TX
stamp is only printed on the front page.
When [TX Stamp] is enabled, a stamp with a diameter of 4 mm is printed in pink at the position shown in the
figure.
To enable printing a stamp, the optional stamp unit is required.
The stamp ink is a consumable item. If the stamp color becomes faint, contact your service representative.
When the original is mixed, the stamp position may be displaced from the point shown in the figure.
To check that the original is successfully transmitted, refer to the transmission report or the transmission
result that appears on the setting confirmation screen.

Printing a TX stamp

Select [TX Stamp] on the Application screen.
VarioLink 5022/VarioLink 4222/VarioLink 3622
Front surface of original
Original transmitting
direction
Stamp
position
4
4-50