Final Drive Oil - Honda 2003 ST1300lA Owner's Manual

Type
v i s c o s i t y
(weight)
Precautions on page 72
Refer to
Safety
RIGHT REAR
1. Place the motorcycle on its center stand on a firm, level surface.
2. Remove the oil filler cap.
3. Check the oil level. It should be flush with the lower edge of the oil filler hole.
4. If the level is low, check for oil leaks. Add the recommended oil through the
oil filler hole until it reaches the lower edge of the opening.
5. Install the oil filler cap.
hypoid gear oil
SAE
80
oil filler cap
Servicing Your Honda

Final Drive Oil

109