Honda 2003 ST1300lA Owner's Manual page 140

Appearance Care
Refer to Safety Precautions on page 72
Aluminum may corrode from contact with dirt, mud, or road salt. Clean the
wheels after riding through any of these substances. Use a wet sponge and mild
detergent. Avoid stiff brushes, steel wool, or cleaners containing abrasives or
chemical compounds.
After washing, rinse with plenty of water and dry with a clean cloth.
If the paint is chipped, apply touch-up paint.
F
Touches
Refer to Safety Precautions on page 72 .
After washing your motorcycle, consider using a commercially-available spray
cleaner/polish or quality liquid or paste wax to finish the job. Use only a non-
abrasive polish or wax made specifically for motorcycles or automobiles. Apply
the polish or wax according to the instructions on the container.
If a surface on your motorcycle is chipped or scratched, your Honda dealer has
touch-up paint to match your motorcycle's color. Be sure to use your
motorcycle's color code (page 171
If the frame has a chip that exposes the metal, first apply primer (to prevent
corrosion) and then apply the touch-up paint. Several thin layers of touch-up
paint are better than one thick coat.
138
Servicing Your Honda
) when you buy touch-up paint.