Final Drive Oil
Checking the Final Drive Oil
1. Hold the motorcycle upright on firm level
ground.
2. Remove the oil fill hole cap.
3. Check the oil level. It should be flush with
the lower edge of the oil fill hole.
Lower edge
Adding Final Drive Oil
If the final drive oil level is low, check for oil
leaks. Add the recommended final drive oil
(
the opening.
1. Pour the final drive oil into the oil fill hole
Oil fill hole cap
2. Reinstall the oil fill hole cap and tighten.
P.
47) until it reaches the lower edge of
2
until it reaches the lower edge of the
opening.
u
Do not over fill above the lower edge of
oil fill hole.
u
Make sure no foreign objects enter the
oil fill hole.
u
Wipe up any spills immediately.
Torque: 9 lbf·ft (12 N·m, 1.2 kgf·m).
73