Honda 2003 ST1300lA Owner's Manual page 152

Table of Contents

Advertisement

Due to the uncertainty of any temporary repair, you should ride slowly (not over
30
50
mph,
km/h) and carefully (preferably without a passenger or cargo) until
the tire is replaced or permanently repaired. Stop frequently and check the air
pressure. If the tire is losing pressure, it may be unsafe to continue riding. As the
tire gets low, it will affect the handling of your motorcycle (especially with a
passenger and cargo) and it may overheat and blow out.
The following types of temporary repairs generally require a source of air to
inflate the tire. Possible sources include
air designed to inflate a tire.
Inflate the tire: Tubeless tires have some self-sealing ability if they are
punctured and the result is usually just a slow leak. If this is the case, you can
try inflating the tire to see if it will hold air pressure. If you can see a nail or
other object embedded in the tire tread, do not remove it at this time.
Plug the hole: The idea here is to do something to temporarily stop the leak.
If you have a tubeless tire repair kit, you can pull out the nail and try inserting
an external plug in the puncture. Follow the instructions that came with the
repair kit and be sure to inflate the tire to the correct pressure.
We strongly recommend that you replace, not permanently repair, any tire that is
punctured or damaged, even if the tire has only a minor puncture. For a full
discussion of repairs and replacement, see page 126.
If You Have a Flat Tire
cartridges or cans of compressed
Taking Care of the Unexpected
151

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents