Honda 2003 ST1300lA Owner's Manual page 104

Engine Oil &
Install a New Oil Filter:
5. Remove the oil filter with a filter wrench and let the remaining oil drain out.
Discard the oil filter in an approved manner (page 143
6. Pour the drained oil into a suitable container and dispose of it in an approved
manner (page 143
).
NOTICE
Improper disposal of drained f luids is harmful to the environment.
7. Apply a thin coat of engine oil to the rubber seal of a new oil filter.
UNDER ENGINE
8. Install the new oil filter and tighten it by hand.
9. Using an oil filter wrench attachment and a torque wrench, tighten the new oil
filter to the specified torque:
20 lbf.ft (26 N.m ,2.7 kgf.m)
10. Check the condition of the sealing washer on the drain bolt. Replace the
washer every other time the oil is changed.
Install the drain bolt and tighten it to the specified torque:
22 lbf.ft (29 N.m ,3.0 kgf.m)
102
Servicing Your Honda
Filter
rubber
seal
).
I
oil filter