Honda 2003 ST1300lA Owner's Manual page 120

Suspension
Refer to Safety Precautions on page 7 2
Rebound Damping
RIGHT UNDER
punch mark
To adjust to the standard position:
1. Turn the damping adjuster clockwise until it will no longer turn (lightly seats).
'This is the full hard setting.
2. Turn the adjuster counterclockwise approximately 1 turn so that the punch
mark on the adjuster aligns with the reference punch mark. This is the
standard position.
To Reduce Rebound Damping (SOFT):
For a light load and smooth road conditions, turn the adjuster counterclockwise
toward SOFT (S).
T o Increase Rebound Damping (HARD):
For a firmer ride and rough road conditions, turn the adjuster clockwise toward
HARD (H).
118
Servicing Your Honda
reference mark
damping adjuster