The adjustment knob is used to raise or lower the height of the headlight beam.
You may need to adjust the headlight if you change to a lighter or heavier load
than you normally carry on your motorcycle.
If you carry a heavier or lighter than normal load, you may need to adjust your
headlight beam so you can better see the road ahead and don't blind oncoming
drivers. Obey local laws and regulations concerning headlight adjustment.
To operate, turn the ignition switch to ON.
To lower the beam, turn the headlight beam adjustment knob counterclockwise.
To raise the beam, turn the knob clockwise.
LEFT SIDE
headlight beam adjustment knob
The windshield height adjustment switch is used to raise or lower your
windshield to suit your riding preference. For instructions, see page 49 .
Controls
/
Features
&
Instruments & Controls
35