Digital Clock
The display shows the hour and minute.
To adjust the time:
1. Turn the ignition switch to ON or ACC.
2. Press and hold the CLOCWILLUM button for more than 2 seconds. The
clock will be set in the adjust mode with the hour display flashing.
3. To set the hour, press and release the FCD/H button until the desired hour
appears.
Quick setting
4. To set the minute, press and release the TRIP/M button until the desired
minute appears.
Quick setting
5. To end the adjustment, press the CLOCWILLUM button after the last
adjustment, or turn the ignition switch OFF.
After turning ignition switch OFF, the check will display for ten days.
CLOCWILLUM button
FCD/H button
28
Instruments & Controls
push and hold the FCD/H button until the desired hour
appears.
push and hold the TRIP/M button until the desired
minute appears.
TRIP/M button