Side Stand - Honda 2003 ST1300lA Owner's Manual

Refer to Safety Precautions on page 7 2
LEFT SIDE
Check that the side stand assembly is working properly. If the side stand is
stiff or squeaky, clean the pivot area and lubricate the pivot bolt with clean
grease.
Check the spring for damage or loss of tension.
Check the side stand ignition cut-off system:
1. Sit astride the motorcycle and put the transmission in neutral.
2.
Raise the side stand.
3. Start the engine.
4. Pull the clutch lever in.
5. Shift the transmission into gear.
6. Lower the side stand all the way.
The engine should stop as you lower the side stand. If the engine doesn't stop,
see your Honda dealer for service.

Side Stand

Servicing Your Honda
129