Maytag Neptune TL FAV6800A Service page 49

Disassembly Procedures
!
25.Insert wrench handle in shaft with graphic facing up.
Make sure the handle is fully seated on the shaft and
turn clockwise.
LEFT
26.Lift out Spinner Support.
LEFT
NOTE: The sleeve from the seal can come out on the
Spinner Support Shaft. If Spinner Support is
reinstalled, remove the seal sleeve. A new seal and
sleeve should be inserted into the Outer Tub.
©2003 Maytag Appliances Company
WARNING
BACK
BACK
16022808 Rev. 0
To avoid risk of electrical shock, personal injury or
death; disconnect power to unit before servicing.
LEFT
27. Insert the sleeve into the seal and press.
NOTE: When installing a new seal, make sure the
sleeve from the previous seal has been removed
and discarded.
BACK
49