Disassembly Procedures
!
Console Removal
1. Disconnect power supply to unit.
2. Remove 3 T-15 Torx screws from back Console
Cover.
3. Separate Back Panel from Console.
4. Press the right side of the console and slightly rotate
forward to disengage the two side hooks; the back
panel may need to be held away from the console.
Slide the entire console to the right to remove.
Control Board Removal
1. Disconnect power supply to unit.
2. Remove Console.
3. Separate Back Panel from Console.
4. Pull up on side lock tabs of Ribbon Connector.
30
WARNING
16022808 Rev. 0
To avoid risk of electrical shock, personal injury or
death; disconnect power to unit before servicing.
5. Lift ribbon out of connector.
©2003 Maytag Appliances Company