Intercom - Radio Shack 43-143 Owner's Manual

Beyond the Basics
Exiting a DirectLink
While the handset is using DirectLink communication, the display
shows DIRECTLINK MODE; this means the handset cannot make
or receive normal phone calls. To exit the DirectLink feature and
return to standby, press the CANCEL soft key and then press
the OK soft key, or return the handset to the cradle. DIRECTLINK
MODE CANCEL appears in the display.

Intercom

You can use the intercom to talk to another station without using
the phone line.
Making an Intercom Page
1. While the phone is in standby, press INT'COM/HOLD on the
cordless handset or base.
2. Use
press the OK soft key.
3. An intercom tone sounds. If you select ALL, all other
registered handsets and the base will be paged.
To cancel intercom, press the CANCEL soft key (On the
handset,
NOTES
UP841BH_43-143_OM3.indd 63
Communication
TM
or to select the station you want to talk with. Then
is also available).
Intercom paging will be canceled if any of the
following things occur:
- You receive an outside call or an intercom page
while selecting the other station.
- You do not select a station within 30 seconds.
- Another station you are trying to page does not
answer the page within one minute.
- Another station you are trying to page is busy, or
all stations are busy when you select ALL.
- Another handset you are trying to page is out of
range (UNAVAILABLE appears in the display).
- The initiating handset is out of range (OUT OF
RANGE appears in the display).

12/19/2006 6:55:25 PM